Site map
Every page on this site
Machine readable versions of this map are available in sitemap.xml and llms.txt.
Product forms
Material families
Grade data sheets
- 254SMO / Alloy 254 (6 Mo Super Austenitic)
- Duplex Stainless Steel 2205
- Expansion Alloy 4J50
- GH3039
- GH3044
- GH3128
- GH4033
- GH4738 / Waspaloy
- Hastelloy B-2
- Hastelloy B-3
- Hastelloy C-2000
- Hastelloy C-22
- Hastelloy C-276
- Hastelloy C-4
- Hastelloy G-30
- Hastelloy X
- Haynes 188
- Haynes 214
- Haynes 230
- Haynes 242
- Incoloy 330 / RA330
- Incoloy 800
- Incoloy 800H / 800HT
- Incoloy 825
- Incoloy 925
- Incoloy 926
- Incoloy A-286 / GH2132
- Inconel 600
- Inconel 601
- Inconel 602 CA
- Inconel 617
- Inconel 625
- Inconel 690
- Inconel 718
- Inconel X-750
- Invar 36 / 4J36
- Invar 42 (4J42)
- Kovar 4J29
- L-605 / Haynes 25
- Lean Duplex 2101
- Lean Duplex 2304
- MP35N
- Monel 400
- Monel 401
- Monel 404
- Monel 502
- Monel K-500
- Monel R-405
- Nickel 200
- Nickel 200 / Nickel 201
- Nickel 201
- Nickel 205
- Nickel 270
- Nimonic 263
- Nimonic 75
- Nimonic 80A
- Nimonic 90
- Soft Magnetic Alloy 1J50
- Soft Magnetic Alloy 1J79 (Permalloy 80)
- Stainless 13-8Mo
- Stainless 15-5PH
- Stainless 17-4PH
- Stainless 253 MA
- Stainless 304 / 304L
- Stainless 304H
- Stainless 309S
- Stainless 310S
- Stainless 316
- Stainless 316L
- Stainless 316Ti
- Stainless 317L
- Stainless 321
- Stainless 347
- Stainless 410
- Stainless 420
- Stainless 440C
- Stainless Steel 316 / 316L
- Stainless Steel 321 / 347
- Stainless Steel 904L (N08904)
- Super Duplex 32760 (Zeron 100)
- Super Duplex Stainless Steel 2507
- Titanium Grade 1
- Titanium Grade 11 (Ti-0.15Pd)
- Titanium Grade 12 (Ti-0.3Mo-0.8Ni)
- Titanium Grade 2
- Titanium Grade 23 (Ti-6Al-4V ELI)
- Titanium Grade 3
- Titanium Grade 4
- Titanium Grade 5 (Ti-6Al-4V)
- Titanium Grade 7 (Ti-0.15Pd)
- Titanium Grade 9 (Ti-3Al-2.5V)
Knowledge
- Technical knowledge
- How to choose a flange material for corrosive service
- Inconel 625 vs 316L for marine piping: when the upgrade pays
- How to read nickel alloy fitting markings (ASTM B366, ASME B16.9, MSS SP-25)
- ASME B16.9 elbow dimensions explained: LR, SR, angles and tolerances
- Duplex 2205 vs super duplex 2507: choosing the right duplex grade
- Inconel 718 heat treatment explained: solution anneal and double ageing
- Inconel 625 flanges to ASTM B564: properties, classes and ordering notes
- Inconel 718 flanges and bolting: strength, hardness limits and sour service
- Inconel 600 vs Inconel 625: which alloy for your piping?
- Inconel 601 and 617 for elevated temperature fittings and ducting
- Inconel 690 for steam generator tubing and caustic service
- Inconel X-750: the alloy behind high temperature fasteners and springs
- Machining and welding Inconel 625 flanges: shop practice that works
- Inconel 625 vs Hastelloy C-276: a selection method, not a preference
- Inconel 718 vs Inconel 625 for flanges, fittings and bolting
- Inconel 625 weld overlay: the economical way to buy corrosion resistance
- Incoloy 825 for sulphuric and phosphoric acid piping
- Incoloy 800H vs 800HT: what the extra letters actually buy
- Incoloy 925 for sour oil and gas flanges and tubular components
- Incoloy A-286: high strength bolting for elevated temperature joints
- Hastelloy C-276 flanges: the reference alloy for aggressive chemical duty
- Hastelloy C-22 vs C-276: choosing between the two workhorse C alloys
- Hastelloy B-2 and B-3: the hydrochloric acid specialists
- Monel 400 in seawater and hydrofluoric acid service
- Monel K-500: age hardened strength with Monel corrosion resistance
- Nickel 200 vs Nickel 201: the caustic service decision
- Duplex 2205 flanges to ASTM A182 F51: what the grade actually delivers
- Super duplex 2507 for subsea and high chloride piping
- Duplex 2205 vs 316L: the cost case, not just the corrosion case
- Sigma phase in super duplex: how it forms and how to prevent it
- 316L, 316Ti and 317L: choosing within the molybdenum stainless family
- 904L stainless steel for sulphuric acid piping
- 254SMO vs 904L: two different answers to chloride problems
- Stabilised stainless steel: when 321 and 347 beat 304H and 316H
- 17-4PH and 15-5PH: precipitation hardening stainless for strength
- 310S and 253MA: austenitic grades for elevated temperature service
- Titanium Grade 2 for seawater, chlorine and desalination piping
- Titanium Grade 5 (Ti-6Al-4V) vs Grade 2: strength versus corrosion
- Titanium Grade 7 and Grade 12: closing the crevice and reducing acid gaps
- ASTM B564 explained: what the flange material specification actually covers
- ASTM B366 explained: the specification behind nickel alloy fittings
- ASME B16.5 pressure temperature ratings: how to read the tables
- ASME B16.47 large diameter flanges: series A versus series B
- MSS SP-25 marking: the cheapest traceability you will ever buy
- NACE MR0175 / ISO 15156 requirements for flanges in sour service
- PREN and critical pitting temperature: use both, trust neither blindly
- ASTM A182 duplex flange grades: F51, F53 and F55 decoded
- Flange facing types: raised face, flat face, ring joint and tongue and groove
- Long radius versus short radius elbows: what the difference costs you
- Concentric versus eccentric reducers: choosing by what settles out
- Pipe schedules and wall thickness: choosing the wall that the duty needs
- Positive material identification: the control that prevents mixed material
- Heat numbers and mill test certificates: reading the paperwork properly
- Hydrostatic testing and non destructive examination of alloy fittings
- Welding Inconel 625 to carbon steel: buttering, filler and control
- Welding duplex stainless flanges: keeping the phase balance
- Welding titanium: shielding, contamination and why colour matters
- Post weld heat treatment of nickel alloys: when to specify and when to avoid
- Solution annealing and sensitisation: what the heat treatment actually achieves
- Crevice corrosion under gaskets and deposits: the hidden failure mode
- Erosion corrosion in elbows and tees: where velocity attacks first
- Galvanic corrosion when nickel alloys meet carbon steel
- Pickling, passivation and iron contamination control
- Material selection for sour service: an H2S decision path
- Flange leak troubleshooting: a checklist that finds the real cause
- Storage and handling of alloy flanges: protecting the investment